Sony DSR-450 WSP

Sony Camcorders like the DSR-570WSP and DSR-390P have already attracted a dedicated following from programme makers looking for the best possible blend of features, performance and value from the DVCAM format.

Today these camcorders are the preferred choice for a variety of all applications all around the world, from video journalism and newsgathering to event photography and much more.

Features

  • 2/3”Power HAD EX CCDs
  • 2.5” Built- In LCD Panel
  • Scene File Store On Memory Stick
  • Assignable Buttons
  • Programmable Gain
  • Electric CC Filter
  • Auto – Tracing White Balance (ATW)
  • Interval Recording (Time – lapse)
  • Versatile Interfaces
  • High Power Video Light Connector
  • InfoLithium Battery Compatible
  • Camera Remote Control via RM – B150/B750

Benefits

  • 16:9/4:3 Switchable
  • Film Like Shooting with Progressive Mode
  • Superb Image Quality
  • Built in LCD Monitor
  • DVCAM & DV(SP) Recording
  • Rugged & Ergonomic Design
  • Flexible Image Controls
  • Scene File Store Memory Stick™
  • New Mechanical Deck

Technical Specifications

FF/REW time Approx. 45 sec (with PDVM – 40ME), 2min 30 sec (with PDV – 184ME)
Power Requirements DC 12v
Power Consumption Approx. 17W (with DC 12v power, REC mode, viewfinder off, LCD monitor off)
Mass Approx. 6.5kg (14lb 5oz) (with viewfinder, microphone, BP – GL65 battery, Mini DVCAM cassette, VCL – 917BY lens)
Continuous operating time Approx. 300 min. (BP GL95 battery, REC mode)
Built-in LCD monitor 2.5 –inch type colour (214,000 pixels)
Viewfinder 1.5 –inch type CRT, monochrome

Inputs/Outputs

Analogue composite input BNC (with CBK-SC01)
Monitor output BNC
Genlock video input BNC
Earphone output Mini Jack
Audio input (CH1/2) XLR – 3(x2), female
Lens 12- pin
Microphone input XLR – 3, female
VF 20-pin
Time Code input BNC
Remote 8- pin
SDI output BNC (with CBK-SD01)
Wireless microphone 7-pin
i.Link output 6-pin, IEEE1394 based
Light 2-pin, DC 12v, max. 50W
Analogue composite output BNC
DC input XLR 4- pin, male
Audio output (CH1/2) RCA pin (x2)
DC output 4-pin (for wireless microphone receiver), DC 12v (max.02A)
Time Code output BNC

Back